Maple – Front tree. 34′ x 12″ diameter.

Cut down, cut stump as low as conditions permit. Dispose of debris.

STUMP GRINDING (estimated until after 811 call and inspection work below completed)

I will need to call 811 to confirm utility line locations. Grind entire mound area (about 5′ diameter) deep enough to allow replanting in the same location.

—– [General Stump Grinding Information Below] —– 

811 locates water and sewer to the curb, electrical, gas, and telecom to the house. Water and sewer generally go straight from the curb location to the house. If there is a question about water and sewer location the customer must waive my liability for these lines.

811 does not mark irrigation systems, low voltage wiring (dog invisible fences, lighting, security, etc.) and other underground systems. Per my waiver, I cannot take responsibility for these unless notified as to their existence and location.

EXTENDED GRINDING – Use grinder to grind entire 8×8 area centered on tree stump. Grind 6″ below grade.

GRINDINGS REMOVAL – Remove stump grindings and mound until near lawn grade. Expecting 1/2 cubic yard for disposal at $200/yd disposed. Leave 1-2″ above grade to allow for settling to avoid having a pit forming where tree stump was. If grinding entire 8×8 area, also remove any large root chunks while smoothing out area.