Leyland Cypress – 30-35 feet tall x 12 inch trunk

Cut down, cut stump as low as possible, dispose of debris.

There are a couple squirrel nests in the tree, confirm that those are empty before removing or wait until late June if occupied.

REBAR LOCATING – Trees in some sections of Carolina Preserve were planted with steel rebar instead of wooden stakes. I must locate using a metal detector and remove any rebar before stump grinding. It is extremely dangerous to grind a stump without removing rebar first.

FOUND REBAR charged @ $10-$20/piece. Trees typically have 3 pieces, but some have less or none where someone removed it already.

TOTAL (typical): $0-$60 PER TREE

*THERE IS NO CHARGE IF NO REBAR IS FOUND*. Wapner is generally outside the area where rebar was used.

STUMP GRINDING (estimated until after 811 call and inspection work below completed)

I will need to call 811 to confirm utility line locations. Grind entire mound area. I will need to bring the machine in through Mr. Castellano’s backyard.

—– [General Stump Grinding Information Below] —– 

811 locates water and sewer to the curb, electrical, gas, and telecom to the house. Water and sewer generally go straight from the curb location to the house. If there is a question about water and sewer location the customer must waive my liability for these lines.

811 does not mark irrigation systems, low voltage wiring (dog invisible fences, lighting, security, etc.) and other underground systems. Per my waiver, I cannot take responsibility for these unless notified as to their existence and location.

GRINDINGS – Take grindings from main trunk area and dispose of them to allow for re-planting immediately. Disposing of 1/3 cubic yard of grindings @ $150/yd disposed.

If you’d like additional soil removed, I can remove it charged at price of actual material removed.