I picked up a tree work request recently that led me to downtown Raleigh. The pictures the owner sent me caught my eye: during a recent storm a 30 foot Mulberry (Morus rubra) trunk had split off from its larger partner and fell across the roof of his shed and the fences on three properties. Amazingly, there was minimal damage to all the structures from the initial fall. My task was to get this piece down without additional damage. The split was 8 feet off the ground and Mulberry is dense wood so this took some planning.
My overall course was to rig the trunk, suspending it off the remaining trunk with a line about 25 feet up that connected back to a monster of a Black Walnut (Juglans nigra) with a two high-strength slings and a rope puller. This way I could reduce the pressure the piece put on all the structures and have control over how the piece would drop.
I started by removing everything from the fences and cutting back so the trunk ended at the peak of the shed. A key here was to use moving blankets in between the limbs and fences before cutting to prevent additional damage. I also used multiple blankets to protect the shed roof. I reached the halfway point when the trunk was down to 10 feet long and off the shed.
At this point it was hanging by the rigging line on the right side and the split on the left. It was still over one fence, so I couldn’t just drop it. I cut off sections and lowered them instead. This prevented damage to the hard surfacing beside the shed. Then I used the rigging to pull the remaining stub up and back over the fence, took a short walk around the neighborhood to get into the other yard, and cut the last piece off.
It was one of those NC summer days when the temperature and humidity were the same number, probably 90, and I was fairly soaked at this point. But the finish line was in sight. I bucked up the logs for firewood, removed all the small limbs and leaves from the property, and raked & blew up the saw dust for a clean look.
Work sites like this are complicated with three properties, three owners, and fences in between them all. I was grateful that all involved were easy to work with. I’ve even been back since this job to do additional tree downing and disposal. One of my favorite jobs so far.
Do you have a tree split that you need taken down safely? Show me!