Earlier this year I cut down and disposed of a 32 foot hickory (Carya sp.) tree with a 12 inch base growing on the side of a customer’s house in Raleigh. Not only was this tree rubbing against the flashing and shingles of the roof, it had also grown so large the fuse box for the A/C unit could no longer be opened. I love hickories and pecans, but this one was totally out of place.
The tree was a simple removal because there was a favorable window in the yard to lay it down. I cut away branches to the roof line with a pole saw to get them out of the way. Rope installation followed and then a standard open-face notch with back-cut. I pulled down the hickory nice & easy by leaving the hinge wood a bit thicker. “Nice & easy” is the best way when dealing with hundreds of pounds of wood and many targets – house, A/C unit, and patio.
Tight control on the chainsaw was critical when finishing the downing phase by cutting the trunk away from the A/C unit. It was right on top of the fuse box with the large power cable going to the condenser only inches from the nose of the chainsaw’s bar.
After that, it was a simple job to load and clean up.